If not, they are located at the Asustek site. If so, the case wiring has nothing to do with it. This so happens to be the Zener Diode that I have replaced which was previously shorted. Creative SBS A 5. Embedded Systems and Microcontrollers.

Uploader: Mazuramar
Date Added: 10 May 2011
File Size: 49.84 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 70627
Price: Free* [*Free Regsitration Required]

Watch it live here Mobile by John Falcone Nov 8, You could look yourself, google “ac97 speaker fill”, no quotes. Connect creagive FL and FR speakers only.

Creative A – speaker system – for PC Overview – CNET

.51 IF your subwoofer has jacks for all the speakers then connect the speakers to the sub. Click here to Register a free account now! And played the song lose yourself again and same as before it didn’t work. No sound from R and L. Have you tried replacing the front right speaker with one of the other speakers temporarily to see if the speaker is defective, or the channel is the problem. I found out the problem – it was the fault of the cable as pointed out by Rif.

Power Device Power Source. Remove the other 2 black and orange. Then try any media known to have 5. Responding to your last comments ignore if the above procedures work: Third and most important is to check the remote cable for continuity.


Samsung Developer Conferenceday 2: Best way to know if you bought the right audio system Best a5520 to know if you bought speqkers right audio system by Steve Guttenberg.

According to the motherboard manual right at the end p72 you may be seeing the blue Sound Effect icon. Hope it works clean and clear as crearive used to when I re-asseblme the circuit insde the subwoofer cabinet.

Take apart remote and check for continuity in every conductor inside the remote cable. If you followed my instructions, the first test with 2. As for your query, it’s a uf creatve capacitor.

Creative A520 – speaker system – for PC

Im still not getting any sound output. Thinking it is something wrong with the 2 audio amplifier ICs TDAJ I have replaced them as well these were the last of the components leaving aside caps and resistors that i have not replaced on this board. Can it be because of Sound card????

So i went into sound man settings and set the environment to living room Ppc think “Speaker Fill” may be a setting that’s available in Vista onwards so root through the Sound properties and look for Enhancements. Posted 13 February – I wish I had that insight to figure out what’s wrong here – the kind of knowledge that let you isolate areas of circuit take measurements and figure out which components were spaekers, rather than having to replace all of them and still get no sound output.


I don’t know if that is automatic or selected by the player. No harm in trying each option, one by one. It’s curious no driver was installed.

Do i need sound card. Speakers by Steve Guttenberg Dec 1, After carefully testing the cable of the volume control I found that the volume pin was shorting with the ground pin which is why the volume was always 0v. I checked the spec sheet for this IC and it was quite helpful even for a beginner like myself. I resoldered them speamers on, but I didnt find the rceative to put the board back in and fit the wires back.

Speakers by Steve Guttenberg Dec 8,